This module allows you to publish stories directly to your Telegram account. Note: Telegram only allows story posting through mobile versions, so if you are using Telegram Desktop — proceed with caution. The video or photo for upload must not exceed 10 MB.
Before full-scale use, be sure to run a test publication — in different countries, Telegram regulates access to stories differently depending on whether you have a premium subscription. Some geos require Telegram Premium even for basic story uploads. Always check in advance!
Setup steps:
1. Number of stories per account – a range is set, within which the software randomly selects the number of stories for each account. This value varies to avoid identical behavior across all accounts.
2. Delay – here you set the pause between story publications. Since the process may take longer than, for example, sending invites, it’s recommended to set a realistic delay — optimally start with a 20–40 or 30–60 second range and adjust based on test results.
3. Select accounts – select the profiles from which stories will be uploaded. You can only work with accounts from the «Active» group.
4. Share stories – sets the visibility of the story: it can be shown either to everyone or only to added contacts in the selected account.
5. File distribution – determines how content will be distributed among accounts. In random mode, files may repeat, and in unique mode — each file is published only once, strictly in order.
6. Select files – upload images or short videos here (up to 60 seconds). Important: Telegram rejects videos longer than one minute and larger than 10 MB, so stay within these limits.
7. Story description – adds text to the publication. Spintax format is supported — for example, {hey|hi|hola}, allowing you to make descriptions varied and avoid repetition.
8. Tag users – by enabling this feature, you can mention users in your story. A field will appear on the right for entering usernames or links. You can also set the minimum and maximum number of users to tag — the software will randomly choose a number within the specified range. A pause is also added between mentions to avoid suspicion and spam. Always remember that each mentioned user receives a notification — don’t overdo it.
9. Streams сontrol – if you are using many accounts, parallel work can be enabled. You set the number of simultaneously active threads (equal to the number of accounts working at the moment) and the wait time before launching the next account. The delay is also specified as a range, and the software randomly selects a value from that interval each time. This helps evenly distribute the load.
Before full-scale use, be sure to run a test publication — in different countries, Telegram regulates access to stories differently depending on whether you have a premium subscription. Some geos require Telegram Premium even for basic story uploads. Always check in advance!
Setup steps:
1. Number of stories per account – a range is set, within which the software randomly selects the number of stories for each account. This value varies to avoid identical behavior across all accounts.
2. Delay – here you set the pause between story publications. Since the process may take longer than, for example, sending invites, it’s recommended to set a realistic delay — optimally start with a 20–40 or 30–60 second range and adjust based on test results.
3. Select accounts – select the profiles from which stories will be uploaded. You can only work with accounts from the «Active» group.
4. Share stories – sets the visibility of the story: it can be shown either to everyone or only to added contacts in the selected account.
5. File distribution – determines how content will be distributed among accounts. In random mode, files may repeat, and in unique mode — each file is published only once, strictly in order.
6. Select files – upload images or short videos here (up to 60 seconds). Important: Telegram rejects videos longer than one minute and larger than 10 MB, so stay within these limits.
7. Story description – adds text to the publication. Spintax format is supported — for example, {hey|hi|hola}, allowing you to make descriptions varied and avoid repetition.
8. Tag users – by enabling this feature, you can mention users in your story. A field will appear on the right for entering usernames or links. You can also set the minimum and maximum number of users to tag — the software will randomly choose a number within the specified range. A pause is also added between mentions to avoid suspicion and spam. Always remember that each mentioned user receives a notification — don’t overdo it.
9. Streams сontrol – if you are using many accounts, parallel work can be enabled. You set the number of simultaneously active threads (equal to the number of accounts working at the moment) and the wait time before launching the next account. The delay is also specified as a range, and the software randomly selects a value from that interval each time. This helps evenly distribute the load.
Последнее редактирование: